The perfect choice for any theatre room

2,200 lumens of brightness powerfully deliver stunning clarity, achieving an extraordinary level of picture performance even in larger home cinema rooms. You’ll experience frame by frame optimised HDR through the X1™ for projector processing creating fabulously rich cinematic colors, smooth motion and spectacular contrast.

Specifications

Display System

4K SXRD panel, projection system

Size of effective display area

0.74” x 3

Number of pixels

26,542,080 (4096 x 2160 x 3) pixels

Focus

Powered

Zoom

Powered

Lens shift

VPLL-Z7013 (Bundled): Powered V ± 80%, H ± 31%
VPLL-Z7008 (Optional): Powered V ± 50%, H ± 18%

Throw ratio *1

VPLL-Z7013 (Bundled): 1.35 : 1 to 2.90 : 1
VPLL-Z7008 (Optional): 0.85 : 1 to 1.06 : 1

Light source

Laser diode

Light output

2,200 lm

Colour light output

2,200 lm

Dynamic contrast

∞:1

Accepted digital signals

720x576/50p, 720x480/60p, 1280x720/50p, 1280x720/60p, 1920x1080/50i, 1920x1080/60i, 1920x1080/24p, 1920x1080/50p, 1920x1080/60p, 3840 x 2160/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840x2160/50p, 3840x2160/60p, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 2160/30p, 4096x2160/50p, 4096x2160/60p,

OSD language

language 18-languages (English, Dutch, French, Italian, German, Spanish, Portuguese, Turkish, Russian, Swedish, Norwegian, Japanese, Simplified Chinese, Traditional Chinese, Korean, Thai, Arabic, Polish)

HDMI*2

x 2 (HDCP2.2)

Trigger

x 2 (Mini jack, DC 12 V, Max. 100 mA)

RS-232C

x1 (D-sub 9-pin (male))

LAN

x1 (RJ-45, 10BASE-T/100BASE-TX)

IR IN / OUT

IN: x 1 (Mini jack)

USB

x 1 (Type A, DC 5 V, Max. 500 mA)

Picture processor

X1 for projector

Acoustic noise*3

24 dB

Operating temperature / Operating humidity

5°C to 35°C (41°F to 95°F) / 20% to 80% (no condensation)

Storage temperature / Storage humidity

-10°C to +60°C (14°F to +140°F) / 20% to 80% (no condensation)

Power requirements

AC 100-240 V, 50/60 Hz

Power consumption

490 W

Standby

0.4 W (when “Remote Start” is set to “Off”)

Networked standby

1.0 W (LAN) (when “Remote Start” is set to “On”)
When a LAN terminal is not connected, it becomes a low power consumption mode (0.5 W)

Standby Mode / Networked Standby Mode Activated

After about 10 Minutes

3D capability

Yes

3D emitter

Built-in RD emitter

Dimensions (Without Protrusions)

W 560 x H 223 x D 496 mm (W 22 1/16 x H 8 25/32 x D 19 17/32 in)

Mass

Approx. 22 kg / 49 lb

Supplied accessories

RM-PJ24 Remote Commander (1), Size AA (R6) Manganese Batteries (2), AC Power Cord (1), Lens Cap (1), Quick Reference Manual (1),Safety Regulations (1)

*1

Display size : 16:9

*2

HDMI Input2 is compatible with HDCP 2.2.

*3

Depends on the projector setting condition and usage environment.